A Highly Efficient Environmental-Friendly Adsorbent Based on Schiff Base for Removal of Cu(II) from Aqueous Solutions: A Combined Experimental and Theoretical Study

Removal of heavy metals from drinking water sources and rivers is of strategic health importance and is essential for sustainable ecosystem development, in particular in polluted areas around the globe. In this work, new hybrid inorganic-organic material adsorbents made of ortho- (Si-o-OR) or para-Schiff base silica (Si-p-OR) were synthesized and characterized in depth. These hybrid adsorbents show a high selectivity to Cu(II), even in the presence of competing heavy metals (Zn(II), Cd(II), and Pb(II)), and also demonstrate great reusability after five adsorption-desorption cycles. Maximum sorption capacity for Cu(II) was found for Si-o-OR (79.36 mg g⁻¹) and Si-p-OR (36.20 mg g⁻¹) in no less than 25 min. Energy dispersive X-ray fluorescence and Fourier transform-infrared spectroscopy studies demonstrate that this uptake occurs due to a chelating effect, which allows these adsorbents to trap Cu(II) ions on their surfaces; this result is supported by a theoretical study for Si-o-OR. The new adsorbents were tested against real water samples extracted from two rivers from the Oriental region of Morocco.     

Analysis of One-Dimensional Advection–Diffusion Model with Variable Coefficients Describing Solute Transport in a Porous medium

This work presents the analytical solution and temporal moments of one-dimensional advection–diffusion model with variable coefficients. Two case studies along with the two different sets of boundary conditions are considered at the inlet and outlet of the domain. In the first case, a time-dependent solute dispersion in the homogeneous domain along uniform flow is taken into account, whereas in the second case, due to inhomogeneity of domain, velocity is taken spatially dependent and the dispersion is assumed proportional to the square of the velocity. The Laplace transform is used to obtain the analytical solutions. The analytical temporal moments are derived from the Laplace domain solutions. To verify the correctness of the analytical solutions, a high-resolution second-order finite volume scheme is applied. Different case studies are considered and discussed. Both analytical and numerical results are in good agreement with each other.     

Synthesis,characterization, density functional theory,thermal, antimicrobial efficacy,and DNA binding/cleavage studies of Cu(II), Cr(III), Fe(III), Ni(II), Co(II), Zn(II), and Pt(IV) complexes with a derivative of 2-hydroxyphenoxymethylfuran-5-carbaldehyde

In this study, Seven new complexes incorporating (E)-2-(((5-([2-hydroxyphenoxy]methyl)furan-2-yl)methylene)amino)phenol derived from 2-hydroxyphenoxymethylfuran-5-carbaldehyde and 2-aminophenol have been synthesized using Cu(II), Cr(III), Fe(III), Ni(II), Co(II), Zn(II), and Pt(IV) metal salts. Thermal measurements, molar conductance, magnetic moment, elemental analyses, spectral (IR, UV–Vis, ¹H nuclear magnetic resonance (NMR), ESR, Mass), were used to characterize insulated solid complexes. The thermogravimetry (TG) and differential thermoanalysis (DTA) of the complexes were carried out in the range of 30–900°C. Magnetic susceptibility and electronic spectral data, as well as quantum chemical calculations, reveal the square planar geometry for Ni (II) complex, square planar/octahedral geometry for Cu (II) complex, while Co(II), Zn(II), Cr(III), Fe(III), and Pt (IV) complexes are octahedral geometry. Density functional theory (DFT) studies revealed that geometries of metal complexes and Schiff base were entirely optimized in relation to use energy by 6–31 + g (d,p) basis set. The complexes show a well-defined crystal system indicated by a powder-X-ray diffraction pattern. The scanning electron microscope showed complexes were nanocrystalline in nature, in addition to the interaction of the complexes with calf thymus CT-DNA, which was investigated via the UV–visible absorption method. Therefore, the DNA cleavage activity by the H₂L ligand and its metal complexes was performed. Finally, the synthesized complexes were tested for their in-vitro antimicrobial efficacy.     

Real-time observation of discrete Andreev tunneling events

We provide a direct proof of two-electron Andreev transitions in a superconductor-normal-metal tunnel junction by detecting them in a real-time electron counting experiment. Our results are consistent with ballistic Andreev transport with an order of magnitude higher rate than expected for a uniform barrier, suggesting that only part of the interface is effectively contributing to the transport. These findings are quantitatively supported by our direct current measurements in single-electron transistors with similar tunnel barriers.     

Gold(I) complexes bearing mixed-donor ligands derived from N-heterocyclic carbenes

The new 2-phenylthiocarbamoyl-1,3-dimesitylimidazolium inner salt (IMes·CSNPh) reacts with [AuCl(L)] in the presence of NH(4)PF(6) to yield [(L)Au(SCNPh·IMes)](+) (L = PMe(3), PPh(3), PCy(3), CNBu(t)). The carbene-containing precursor [(IDip)AuCl] reacts with IMes·CSNPh under the same conditions to afford the complex [(IDip)Au(SCNPh·IMes)](+) (IDip = 1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene). Treatment of the diphosphine complex [(dppm)(AuCl)(2)] with one equivalent of IMes·CSNPh yields the digold metallacycle, [(dppm)Au(2)(SCNPh·IMes)](2+), while reaction of [L(2)(AuCl)(2)] with two equivalents of IMes·CSNPh results in [(L(2)){Au(SCNPh·IMes)}(2)](2+) (L(2) = dppb, dppf, or dppa; dppb = 1,4-bis(diphenylphosphino)butane, dppf = 1,1'-bis(diphenylphosphino)ferrocene, dppa = 1,4-bis(diphenylphosphino)acetylene). The homoleptic complex [Au(SCNPh·IMes)(2)](+) is formed on reaction of [AuCl(tht)] (tht = tetrahydrothiophene) with two equivalents of the imidazolium-2-phenylthiocarbamoyl ligand. This product reacts with AgOTf to yield the mixed metal compound [AuAg(SCNPh·IMes)(2)](2+). Over time, the unusual trimetallic complex [Au(AgOTf)(2)(SCNPh·IMes)(2)](+) is formed. The sulfur-oxygen mixed-donor ligands IMes·COS and SIMes·COS (SIMes = 1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene) were used to prepare [(L)Au(SOC·IMes)](+) and [(L)Au(SOC·SIMes)](+) from [(L)AuCl] (L = PPh(3), CN(t)Bu). The bimetallic examples [(dppf){Au(SOC·IMes)}(2)](2+) and [(dppf){Au(SOC·SIMes)}(2)](2+) were synthesized from the reaction of [(dppf)(AuCl)(2)] with the appropriate ligand. Reaction of [(tht)AuCl] with one equivalent of IMes·COS or SIMes·COS yields [Au(SOC·IMes)(2)](+) and [Au(SOC·SIMes)(2)](+), respectively. The compounds [(Ph(3)P)Au(SCNPh·IMes)]PF(6), [(Cy(3)P)Au(SCNPh·IMes)]PF(6) and [Au(AgOTf)(2)(SCNPh·IMes)(2)]OTf were characterized crystallographically.     

Development and Validation of a Method for Quantification of Favipiravir as COVID-19 Management in Spiked Human Plasma

In the current work, a simple, economical, accurate, and precise HPLC method with UV detection was developed to quantify Favipiravir (FVIR) in spiked human plasma using acyclovir (ACVR) as an internal standard in the COVID-19 pandemic time. Both FVIR and ACVR were well separated and resolved on the C18 column using the mobile phase blend of methanol:acetonitrile:20 mM phosphate buffer (pH 3.1) in an isocratic mode flow rate of 1 mL/min with a proportion of 30:10:60 %, v/v/v. The detector wavelength was set at 242 nm. Maximum recovery of FVIR and ACVR from plasma was obtained with dichloromethane (DCM) as extracting solvent. The calibration curve was found to be linear in the range of 3.1–60.0 µg/mL with regression coefficient (r²) = 0.9976. However, with acceptable r², the calibration data’s heteroscedasticity was observed, which was further reduced using weighted linear regression with weighting factor 1/x. Finally, the method was validated concerning sensitivity, accuracy (Inter and Intraday’s % RE and RSD were 0.28, 0.65 and 1.00, 0.12 respectively), precision, recovery (89.99%, 89.09%, and 90.81% for LQC, MQC, and HQC, respectively), stability (% RSD for 30-day were 3.04 and 1.71 for LQC and HQC, respectively at −20 °C), and carry-over US-FDA guidance for Bioanalytical Method Validation for researchers in the COVID-19 pandemic crisis. Furthermore, there was no significant difference for selectivity when evaluated at LLOQ concentration of 3 µg/mL of FVIR and relative to the blank.     

Intermolecular potential energy surface for CS2 dimer

A new four‐dimensional intermolecular potential energy surface for CS₂ dimer is obtained by ab initio calculation of the interaction energies for a range of configurations and center‐of‐mass separation distances for the first time. The calculations were performed using the supermolecular approach at the Møller–Plesset second‐order perturbation (MP2) level of theory with the augmented correlation consistent basis sets (aug‐cc‐pVxZ, x = D, T) and corrected for the basis‐set superposition error using the full counterpoise correction method. A two‐point extrapolation method was used to extrapolate the calculated energy points to the complete basis set limit. The effect of using the higher levels of theory, quadratic configuration interaction containing single, double, and perturbative triple excitations QCISD(T) and coupled cluster singles, doubles and perturbative triples excitations CCSD(T), on the shape of potential energy surface was investigated. It is shown that the MP2 level of theory apparently performs extremely poorly for describing the intermolecular potential energy surface, overestimating the total energy by a factor of nearly 1.73 in comparison with the QCISD(T) and CCSD(T) values. The value of isotropic dipole–dipole dispersion coefficient (C₆) of CS₂ fluid was obtained from the extrapolated MP2 potential energy surface. The MP2 extrapolated energy points were fitted to well‐known analytical potential functions using two different methods to represent the potential energy surface analytically. The most stable configuration of the dimer was determined at R = 6.23 au, α = 90°, β = 90°, and γ = 90°, with a well depth of 3.980 kcal mol^?1 at the MP2 level of theory. Finally, the calculated second virial coefficients were compared with experimental values to test the quality of the presented potential energy surface. © 2010 Wiley Periodicals, Inc. J Comput Chem, 2011.     

溶胶凝胶合成锰掺杂ZnO的室温磁性行为

通过溶胶凝胶自燃法合成锰掺杂氧化锌纳米晶体, 研究了Mn掺杂ZnO稀磁半导体(简称DMS)的性质．X射线衍射光谱表明,锰掺杂氧化锌保留纤锌矿型状氧化锌六角晶体结构．采用能量色散X射线能谱和扫描电子显微镜分别对成分和形态进行研究．温度依赖的电阻率显示了DMS的半导体材料行为．振动样品磁强计测定的室温磁性行为,揭示了锰掺杂氧化锌的铁磁性和反磁性特性.     

The Elusive Structure of Levocetirizine Dihydrochloride Determined by Electron Diffraction

Levocetirizine is an orally administrated, second-generation antihistaminic active pharmaceutical ingredient that has been used to treat symptoms of allergy and long-term hives for over 25 years. Despite the wide use of this compound, its crystal structure has remained unknown. Here we report the application of 3D electron diffraction (3D ED)/Micro-crystal electron diffraction (MicroED) to determine the crystal structure of Levocetirizine dihydrochloride directly from crystalline powders that were extracted from commercially available tablets containing the compound. We also showcase the utility of dynamical refinement to unambiguously assign absolute configuration. The results highlight the immense potential of 3D ED/MicroED for structure elucidation of components of microcrystalline mixtures that obviates the need to grow large-size single crystals and the use of complementary analytical techniques, which could be important for identification as well as for primary structural characterization.